Neutral PPD
Product for floor washing and disinfection
A mild alkaline agent based on a combintion of anionic and nonionic tensides. The bactericidal component is active chlorine. It is used in a 3-5% solution. After washing, rinse the surfaces with fresh water and dry with floor mops.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem DF 100
A concentrated agent for floor washing and disinfection.
A neutral agent made of high valued nonionic, amphoteric and cationic tensides. The bactericidal component is a combination of quaterneries which, with organic sequestrens and co-builders produces a strong synergistical effect. It is used in solutions of 1-3%.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Septal
Product for quick disinfection of solid surfaces – without rinsing.
The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.
Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Polisol P
Product for disinfection of solid surfaces.
The active component is Alkil-dimetil-bensil-ammonium-chloride.
Physical and chemical properties:
A colourless liquid with a light, characteristic smell and an extremely strong bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Since it belongs to the group of kation-active tensides, it shows high abilities of reducing surface tension, and thus is very good at wetting, washing and emulsifying.
Application:
„Polisol P“ is a complex disinfectant with strong bactericidal and fungicidal effects, so it is very widely used in healthcare, food industry, veterinary, trading, tourism and everyday life. It affects gram-positive and gram-negative bacteries and, being a cationic product, it must not be mixed with anionic tensides and detergents.
For simple disinfection, 1% and 3% concentrations are used, with exposure times of 15 and 5 minutes, respectively. Like other disinfectants, „Polisol P“ bonds with proteins and other organic compounds.
In order to reach the full effect of the product in the recommended concentrations, it is necessary to wash the treated surfaces well before using the product, and to rinse them after use.
Plastic, glass, porcelain, and stainless steel are completely resistant to all concentrations of „Polisol“. If it is needed to remove certain organic remains from the solid surfaces, use a 5% solution.
Space disinfection:
It is achieved by spraying undiluted „Polisol P“. Since it has a mild, pleasant smell, it also has a deodorising effect.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
