A product for washing, scale removal and disinfection of pool walls and equipment.
The product is directly applied on the surface using a sponge or by spraying. After 10-15 minutes, the surfaces should be rinsed with water.
NOTE:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
A product for algae growth prevention in pools.
During the first filling of the pool with fresh water, an amount of (15-20)g/m3 of the product is added, after the control and, if needed, correction of water pH.
During use of the pool, 10g/m3 is added.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
A product for removing scales and corrosion from ceramic and chromed surfaces.
Contents and purpose of the product:
„Lactochem SK“ is a liquid, acidic product, based on mineral acids and surfactants.
Application method:
It is used for hand cleaning of ceramic and chromed surfaces and removal of scales and corrosion traces. The product is applied with a sponge or brushes, left for 10 minutes and then rinsed with fresh water. If needed, repeat the process. Use protective work equipment for acids (rubber gloves).
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
pH – corrector
„pH - “ corrector is a powdery product designed to lower the pH value of water in pools.
It does not contain mineral acid, it is easily and completely soluble in water. In the case of pH getting over 7.4, a „pH-“ corrector should be applied. For lowering the pH by 0.2, 15g of corrector is needed per 1m3 of water.
The measured amount of corrector should be disolved in water and the solution should be poured directly to the pool, at several places. A pump should be turned on for better homogenization. Guidelines on dosage, storage and precaution measures, found on each package, must be followed.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
pH + corrector
„pH+“ corrector is a powdery product designed to increase the pH value of water in pools.
Easily and completely soluble in water. In the case of an an acidic reaction (pH < 7), „pH+“ corrector should be applied in order to increase the pH value.
The estimated amount of „pH+“ corrector is based on the volume of the pool. For increasing the pH by 0.2, 10g of corrector is needed per 1m3 of water.
The measured amount of corrector should be disolved in water and the solution should be poured directly to the pool, at several places. A pump should be turned on for better homogenization. Guidelines on dosage, storage and precaution measures, found on each package, must be followed.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
