Very alkaline foaming product for removing heavy dirt.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. After the contact time has passed, rinse the surfaces with water. With heavier tar and resin layers repeat the washing operation.
Area of application:
It can be used for washing all kinds of surfaces, except aluminium and zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Acidic foamy agent for washing and removing scale from floors, walls and equipment.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes.
Area of use:
Used for regular sanitation of all surfaces, except zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Mild alcaline foaming agent for washing and disinfection
An excellent foaming agent for daily washing and disinfection of filling machines in alcohol and soft beverage industry. In meat and dairy industry, in can be used for washing and disinfection of desks, floors and equipment.
It is used with a foam generator. Disinfection is based on active chlorine.
The product is used with cold water, in a 3-5% solution and exposition time of 10-15 minutes. After washing, thoroughly wash the surfaces with bacteriologically clean water.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
A neutral foaming combined agent for washing and disinfection.
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. Disinfection is based on bensalconium-chloride as a disinfecting component which, in combination with nonionic surfactants has very strong bactericidal and bacteriostatic effects.
Important:
Do not mix „Dezipen“with other washing agents.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Kiselo peneće sredstvo za pranje, skidanje kamenca i dezinfekciju opreme, podova i zidova.
Koristi se pomoću generatora pene u koncentraciji od 3-5%. Vreme delovanja: 10 – 15 minuta.
Posle pranja, neophodno je ispiranje čistom vodom
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!
