Hemosept

Hemosept
A product for general sanitation and disinfection of water.

Ingredients:

100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate

Physical and chemical characteristics:

White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.

Application:

1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.

a) Working concentration:

For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).

b) Working time

Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.

2. Disinfection of water in pools

It is performed with consultations with experts from our company.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.

Alkoderm

A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.

Liquid form of this disinfectant enables application by spraying in automated disinfecting stations.

Polisol D^®

Product for shoe disinfection

Place of application:

Automated disinfection stations or separate devices for cleaning and disinfection of boots. Disinfection stations are placed at the entrance of a technologically important section of manufacture, or at the entrance of the manufacturing hall.
They represent a set of devices which disinfect footwear (boots), a hand disinfection part and a three-section ramp which enables passage only when both disinfection processes are done.

„Polisol D“ is used with stations with a submerging lattice and with models with rotating brushes as well.
Recommended working concentration is 1.5-2% of „Polisol D“.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.