Products for health care, kitchens & restаurants
Tesa
Tesa
Liquid soap
A modernly concieved liquid soap for frequent washing in healthcare and industry. A combination of anionic and non-ionic tensides efficiently removes dirt and special supplements protect hand skin from drying up.
Mild towards the skin, but energetic against dirt!
Hemo DF
Hemo DF
A product for hand washing and disinfection
Ingredients and properties:
A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.
Area of use:
Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.
Application method
For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.
For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Alkoderm®
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
Liquid form of this disinfectant enables application by spraying in automated disinfecting stations.
Alkoderm gel
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
It is applied in amounts of 2-3ml and rubbed in on the hand skin. It enables complete disinfection and skin care and prevents a possible reinfection. The most efficient way to apply the product
is via a sensor dispenser.
Polisol R
Polisol R®
A product for hand disinfection
„Polisol R®“ is a complex disinfectant with strong bactericidal and fungicidal effects, so it is very widely used in healthcare, food industry, veterinary, trading, tourism and everyday life. It affects gram-positive and gram-negative bacteries and, being a cationic product, it must not be mixed with anionic tensides and detergents.
Hand disinfection:
After thorough soap washing, hands should be rinsed with water, and then wet with a 1% solution of „Polisol R®“ for 5-10 minutes. For quick disinfection on the field, hands can be disinfected with the undiluted product, in 1-2 minutes.
Hemoderm
Hemoderm®
Lotion for people (patients) with sensitive skin.
Maintaining basic hygiene for patients who lie for long time periods, or have difficulties with moving, especially those with sensitive skin, is a serious problem. „Hemoderm“ lotion with its complex and carefully chosen ingredients enables mild disinfection, washing and skin care, It can be used often, without unwanted consequences, such as dry or irritated skin.
Neutral PPD
Neutral PPD
Product for floor washing and disinfection
A mild alkaline agent based on a combintion of anionic and nonionic tensides. The bactericidal component is active chlorine. It is used in a 3-5% solution. After washing, rinse the surfaces with fresh water and dry with floor mops.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem DF 100
Lactochem DF 100
A concentrated agent for floor washing and disinfection.
A neutral agent made of high valued nonionic, amphoteric and cationic tensides. The bactericidal component is a combination of quaterneries which, with organic sequestrens and co-builders produces a strong synergistical effect. It is used in solutions of 1-3%.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Septal
Septal
Product for quick disinfection of solid surfaces – without rinsing.
The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.
Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Polisol P
Polisol P
Product for disinfection of solid surfaces.
The active component is Alkil-dimetil-bensil-ammonium-chloride.
Physical and chemical properties:
A colourless liquid with a light, characteristic smell and an extremely strong bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Since it belongs to the group of kation-active tensides, it shows high abilities of reducing surface tension, and thus is very good at wetting, washing and emulsifying.
Application:
„Polisol P“ is a complex disinfectant with strong bactericidal and fungicidal effects, so it is very widely used in healthcare, food industry, veterinary, trading, tourism and everyday life. It affects gram-positive and gram-negative bacteries and, being a cationic product, it must not be mixed with anionic tensides and detergents.
For simple disinfection, 1% and 3% concentrations are used, with exposure times of 15 and 5 minutes, respectively. Like other disinfectants, „Polisol P“ bonds with proteins and other organic compounds.
In order to reach the full effect of the product in the recommended concentrations, it is necessary to wash the treated surfaces well before using the product, and to rinse them after use.
Plastic, glass, porcelain, and stainless steel are completely resistant to all concentrations of „Polisol“. If it is needed to remove certain organic remains from the solid surfaces, use a 5% solution.
Space disinfection:
It is achieved by spraying undiluted „Polisol P“. Since it has a mild, pleasant smell, it also has a deodorising effect.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo Konvekt
Hemo Konvekt
A product for washing konvektomats
It is used undiluted, according to the guidelines by the equipment - konvektomat manufacturer.
Hemo Matik
Hemo Matik
Liquid, alkaline product for machine washing and disinfection of dishes, based on active chlorine.
Contains:
Sodium-Hydroxide (NaOH)
Disinfecting component: Sodium-Hipochlorite
It is used with automated machines which, via a probe dipped in the product, draw the product out. During manipulation of a canister of „Hemo Matik“, either full or empty, use rubber gloves and protective glasses. Avoid dosing and transfusion of the product by hand.
Store at a temperature higher than +8°C
Bravo
Bravo
Liquid product for machine dish rinsing
The product contains:
- Phosphoric acid – minimum 5%
- Propan-2-ol
Note: When dosing automatically, use recommendations from the machine manufacturer.
Neutral PPS
Neutral PPS
Product for machine floor washing.
„Neutral PPS“ is used with machines for floor washing. Low foam rate enables smooth vacuuming of dirty water. Surfaces remain clean and not slippery. With modern machines, dosage is done automatically – directly from the concentrated product. If dosage is done by hand, use a 1-3% solution.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Septal®
Septal
Product for quick disinfection of solid surfaces – without rinsing.
The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.
Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo DF
Hemo DF
A product for hand washing and disinfection
Ingredients and properties:
A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.
Area of use:
Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.
Application method
For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.
For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Vidik
Vidik
Product for glass washing
The product contains:
- Anionic surfactant <5%,
- Isopropil alcohol <5%,
- Etanol 5-15%
Instructions:
Spray the product on a glass surface. Wipe off with a dry cloth for high gloss (ovo ne ide ovako ali se ne mogu setiti).
As
As
Product for hand dish washing.
Wc sanitar
WC Sanitar
Sensor trash cans
Sensor trash cans
For maximal protection from infections
Click on the photo to zoom it.
Sensor trash can for infectious waste
Sensor trash can for infectious waste
Trash can for infectious waste for healthcare institutions (with a bag)
For maximal protection from infections
Soap dispensers
Sensor soap dispenser
Foam dispenser
Containers for sharp objects
Containers for sharp objects
VIKAN ErgoClean – Hospital trolleys
Vikan ErgoClean hospital trolleys can be configured in a large number of ways. In the picture a small trolley can be seen, with minimal equipment. Based on the needs of the client, we can recommend a trolley which will suit the set task best. In order to present the product better, we have prepared a set with a larger trolley and more equipment. This version can be found on our site if you follow this link.
For more information on the trolley, you can visit the manufacturer's website.