Hemo Konvekt

Hemo Konvekt

A product for washing konvektomats

It is used undiluted, according to the guidelines by the equipment - konvektomat manufacturer.

Hemo Matik

Hemo Matik

Liquid, alkaline product for machine washing and disinfection of dishes, based on active chlorine.

Contains:
Sodium-Hydroxide (NaOH)

Disinfecting component: Sodium-Hipochlorite

It is used with automated machines which, via a probe dipped in the product, draw the product out. During manipulation of a canister of „Hemo Matik“, either full or empty, use rubber gloves and protective glasses. Avoid dosing and transfusion of the product by hand.

Store at a temperature higher than +8°C

Bravo

Bravo

Liquid product for machine dish rinsing

The product contains:
- Phosphoric acid – minimum 5%
- Propan-2-ol

Note: When dosing automatically, use recommendations from the machine manufacturer.

Neutral PPS

Neutral PPS

Product for machine floor washing.

„Neutral PPS“ is used with machines for floor washing. Low foam rate enables smooth vacuuming of dirty water. Surfaces remain clean and not slippery. With modern machines, dosage is done automatically – directly from the concentrated product. If dosage is done by hand, use a 1-3% solution.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.

Septal^®

Septal

Product for quick disinfection of solid surfaces – without rinsing.

The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.

Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.

Hemosept

Hemosept
A product for general sanitation and disinfection of water.

Ingredients:

100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate

Physical and chemical characteristics:

White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.

Application:

1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.

a) Working concentration:

For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).

b) Working time

Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.

2. Disinfection of water in pools

It is performed with consultations with experts from our company.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.

Hemo DF

Hemo DF

A product for hand washing and disinfection

Ingredients and properties:

A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.

Area of use:

Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.

Application method

For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.

For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.

Note:

The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.