Products
We are proud on our wide array of products! In order to make the list easier to browse, we've separated the products in several groups and subgroups. By following the menu on your left, you will easily reach the product of your interest.
Products for maintaining fountains and pools
The procedure of cleaning and disifecting pools and maintaining the water
After thorough mechanical cleaning of the pool, washing, removal of the scales and disinfection are highly suggested, as well as preliminary control of the fresh water.
Washing and scale removal can be done both by hand and machine – using devices for pressurized washing or foam generators. We consider this method the most efficient and economic one.
Suggested products for certain cleaning and disinfection phases:
- For hand washing and scale removal, it is suggested to use „Lactochem SK“. It is used undiluted and it is applied directly on the surface. After 10-15 min., rinse the surfaces.
- For machine washing and scale removal – „Acidopen“. It is used according to the guidelines by the equipment manufacturers, or with consultation with „Hemodom“ experts.
- For combined treatmant, washing, scale removal and disinfection, use „Akvalit“. The product is used diluted (2%) and should be left for 15-20 minutes on the surface and then rinsed.
After refilling the pool, thorough rinsing is required.
Procedure with freshly poured water
Before adding any kind of disinfectant or algicide into the water, before the first pool filling, or later during use, be sure to measure the pH value of the water (using adequate pH paper or a standard pH control set). The ideal pH value lies between 7.1 and 7.4. pH correction is done using „pH +“ or „pH -“ correctors. A larger water pH value can induce irritation of eyes, itching and skin redness. It is usually a consequence of overuse of chlorine based substances. It can also induce the creation of scales (when pH>7.6), which can manifest as white layers on the equipment and pool floor and walls. In the cases of pH being smaller than 7, there is no risk for human skin, but certain metal parts of pool equipment (pipe constructions, pump parts and filters) may corrode. It is suggested to keep the pH value of water between 7.1 and 7.4 using the adequate pH correctors, and then add algicides or chlorine based substances. pH control should be done during the first filling of the pool, daily – during the first couple of days, and once per week after that. Freshly brought water should be disinfected instantly and you should make sure that it does not get reinfected and that algae do not appear as well. Disinfection is to be done using „Hemosept“. The recommended dose is 2g/m3. Hemosept is a chlorine based product (Sodium dichloroisocyanurate dihydrate) and is a very efficient disinfectant. For prolonged disinfection as well as prevention of creation of algae, we suggest „Algicid“. This product is based on benzalkonioum chloride – a cationactive substance of a wide effect spectrum on bacteria and algae. It is added in amounts of (15-20)g/m3.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem SK
A product for removing scales and corrosion from ceramic and chromed surfaces.
Contents and purpose of the product:
„Lactochem SK“ is a liquid, acidic product, based on mineral acids and surfactants.
Application method:
It is used for hand cleaning of ceramic and chromed surfaces and removal of scales and corrosion traces. The product is applied with a sponge or brushes, left for 10 minutes and then rinsed with fresh water. If needed, repeat the process. Use protective work equipment for acids (rubber gloves).
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Algicid
A product for algae growth prevention in pools.
During the first filling of the pool with fresh water, an amount of (15-20)g/m3 of the product is added, after the control and, if needed, correction of water pH.
During use of the pool, 10g/m3 is added.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Aqualit
A product for washing, scale removal and disinfection of pool walls and equipment.
The product is directly applied on the surface using a sponge or by spraying. After 10-15 minutes, the surfaces should be rinsed with water.
NOTE:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
pH "-" korektor
pH – corrector
„pH - “ corrector is a powdery product designed to lower the pH value of water in pools.
It does not contain mineral acid, it is easily and completely soluble in water. In the case of pH getting over 7.4, a „pH-“ corrector should be applied. For lowering the pH by 0.2, 15g of corrector is needed per 1m3 of water.
The measured amount of corrector should be disolved in water and the solution should be poured directly to the pool, at several places. A pump should be turned on for better homogenization. Guidelines on dosage, storage and precaution measures, found on each package, must be followed.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
pH "+" korektor
pH + corrector
„pH+“ corrector is a powdery product designed to increase the pH value of water in pools.
Easily and completely soluble in water. In the case of an an acidic reaction (pH < 7), „pH+“ corrector should be applied in order to increase the pH value.
The estimated amount of „pH+“ corrector is based on the volume of the pool. For increasing the pH by 0.2, 10g of corrector is needed per 1m3 of water.
The measured amount of corrector should be disolved in water and the solution should be poured directly to the pool, at several places. A pump should be turned on for better homogenization. Guidelines on dosage, storage and precaution measures, found on each package, must be followed.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Products for health care, kitchens & restаurants
Hemoderm
Hemoderm®
Lotion for people (patients) with sensitive skin.
Maintaining basic hygiene for patients who lie for long time periods, or have difficulties with moving, especially those with sensitive skin, is a serious problem. „Hemoderm“ lotion with its complex and carefully chosen ingredients enables mild disinfection, washing and skin care, It can be used often, without unwanted consequences, such as dry or irritated skin.
Polisol R
Polisol R®
A product for hand disinfection
„Polisol R®“ is a complex disinfectant with strong bactericidal and fungicidal effects, so it is very widely used in healthcare, food industry, veterinary, trading, tourism and everyday life. It affects gram-positive and gram-negative bacteries and, being a cationic product, it must not be mixed with anionic tensides and detergents.
Hand disinfection:
After thorough soap washing, hands should be rinsed with water, and then wet with a 1% solution of „Polisol R®“ for 5-10 minutes. For quick disinfection on the field, hands can be disinfected with the undiluted product, in 1-2 minutes.
Alkoderm®
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
Liquid form of this disinfectant enables application by spraying in automated disinfecting stations.
Tesa
Tesa
Liquid soap
A modernly concieved liquid soap for frequent washing in healthcare and industry. A combination of anionic and non-ionic tensides efficiently removes dirt and special supplements protect hand skin from drying up.
Mild towards the skin, but energetic against dirt!
Alkoderm gel
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
It is applied in amounts of 2-3ml and rubbed in on the hand skin. It enables complete disinfection and skin care and prevents a possible reinfection. The most efficient way to apply the product
is via a sensor dispenser.
Hemo DF
Hemo DF
A product for hand washing and disinfection
Ingredients and properties:
A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.
Area of use:
Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.
Application method
For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.
For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Polisol P
Polisol P
Product for disinfection of solid surfaces.
The active component is Alkil-dimetil-bensil-ammonium-chloride.
Physical and chemical properties:
A colourless liquid with a light, characteristic smell and an extremely strong bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Since it belongs to the group of kation-active tensides, it shows high abilities of reducing surface tension, and thus is very good at wetting, washing and emulsifying.
Application:
„Polisol P“ is a complex disinfectant with strong bactericidal and fungicidal effects, so it is very widely used in healthcare, food industry, veterinary, trading, tourism and everyday life. It affects gram-positive and gram-negative bacteries and, being a cationic product, it must not be mixed with anionic tensides and detergents.
For simple disinfection, 1% and 3% concentrations are used, with exposure times of 15 and 5 minutes, respectively. Like other disinfectants, „Polisol P“ bonds with proteins and other organic compounds.
In order to reach the full effect of the product in the recommended concentrations, it is necessary to wash the treated surfaces well before using the product, and to rinse them after use.
Plastic, glass, porcelain, and stainless steel are completely resistant to all concentrations of „Polisol“. If it is needed to remove certain organic remains from the solid surfaces, use a 5% solution.
Space disinfection:
It is achieved by spraying undiluted „Polisol P“. Since it has a mild, pleasant smell, it also has a deodorising effect.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem DF 100
Lactochem DF 100
A concentrated agent for floor washing and disinfection.
A neutral agent made of high valued nonionic, amphoteric and cationic tensides. The bactericidal component is a combination of quaterneries which, with organic sequestrens and co-builders produces a strong synergistical effect. It is used in solutions of 1-3%.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Neutral PPD
Neutral PPD
Product for floor washing and disinfection
A mild alkaline agent based on a combintion of anionic and nonionic tensides. The bactericidal component is active chlorine. It is used in a 3-5% solution. After washing, rinse the surfaces with fresh water and dry with floor mops.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Septal
Septal
Product for quick disinfection of solid surfaces – without rinsing.
The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.
Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Wc sanitar
WC Sanitar
Neutral PPS
Neutral PPS
Product for machine floor washing.
„Neutral PPS“ is used with machines for floor washing. Low foam rate enables smooth vacuuming of dirty water. Surfaces remain clean and not slippery. With modern machines, dosage is done automatically – directly from the concentrated product. If dosage is done by hand, use a 1-3% solution.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo Matik
Hemo Matik
Liquid, alkaline product for machine washing and disinfection of dishes, based on active chlorine.
Contains:
Sodium-Hydroxide (NaOH)
Disinfecting component: Sodium-Hipochlorite
It is used with automated machines which, via a probe dipped in the product, draw the product out. During manipulation of a canister of „Hemo Matik“, either full or empty, use rubber gloves and protective glasses. Avoid dosing and transfusion of the product by hand.
Store at a temperature higher than +8°C
Bravo
Bravo
Liquid product for machine dish rinsing
The product contains:
- Phosphoric acid – minimum 5%
- Propan-2-ol
Note: When dosing automatically, use recommendations from the machine manufacturer.
Vidik
Vidik
Product for glass washing
The product contains:
- Anionic surfactant <5%,
- Isopropil alcohol <5%,
- Etanol 5-15%
Instructions:
Spray the product on a glass surface. Wipe off with a dry cloth for high gloss (ovo ne ide ovako ali se ne mogu setiti).
Hemo Konvekt
Hemo Konvekt
A product for washing konvektomats
It is used undiluted, according to the guidelines by the equipment - konvektomat manufacturer.
As
As
Product for hand dish washing.
Septal®
Septal
Product for quick disinfection of solid surfaces – without rinsing.
The alcohol basis is supplemented with a combination of quaterneries. Their synergistic effect enables efficient disinfection of work surfaces, PVC bearings, doorknobs, counter elements, etc. „Septal“ is applied by direct spraying.
Computer keyboards, telephones, etc. can be cleaned and disinfected using a microfiber cloth (the so-called „magic cloth“) sprayed with „Septal“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo DF
Hemo DF
A product for hand washing and disinfection
Ingredients and properties:
A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.
Area of use:
Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.
Application method
For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.
For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
VIKAN ErgoClean – Hospital trolleys
Vikan ErgoClean hospital trolleys can be configured in a large number of ways. In the picture a small trolley can be seen, with minimal equipment. Based on the needs of the client, we can recommend a trolley which will suit the set task best. In order to present the product better, we have prepared a set with a larger trolley and more equipment. This version can be found on our site if you follow this link.
For more information on the trolley, you can visit the manufacturer's website.
Containers for sharp objects
Containers for sharp objects
Soap dispensers
Sensor soap dispenser
Foam dispenser
Sensor trash can for infectious waste
Sensor trash can for infectious waste
Trash can for infectious waste for healthcare institutions (with a bag)
For maximal protection from infections
Sensor trash cans
Sensor trash cans
For maximal protection from infections
Click on the photo to zoom it.
Meat industry products
Polisol R®
Sredstvo za dezinfekciju ruku
"Polisol R®" je kompleksan dezificijens snažnog baktericidnog i fungicidnog delovanja, tako da se vrlo široko upotrebljava u zdravstvu, prehrambenoj industriji, veterini, trgovini, turizmu i u svakodnevnom životu.
Deluje na gram-pozitivne i gram-negativne bakterije, a kao katjonsko sredstvo nikako se ne sme mešati sa anjonskim tenzidima i deterdžentima.
Dezinfekcija ruku:
Posle temeljnog pranja sapunom ruke se isperu vodom, a zatim kvase 1%-tnim rastvorom "Polisola R®" 5-10 minuta. Za brzu dezinfekciju na terenu, ruke se mogu dezinfikovati nerazređenim sredstvom u trajanju od 1- 2 minuta.
Tesa
Tesa
Liquid soap
A modernly concieved liquid soap for frequent washing in healthcare and industry. A combination of anionic and non-ionic tensides efficiently removes dirt and special supplements protect hand skin from drying up.
Mild towards the skin, but energetic against dirt!
Alkoderm Gel
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
It is applied in amounts of 2-3ml and rubbed in on the hand skin. It enables complete disinfection and skin care and prevents a possible reinfection. The most efficient way to apply the product
is via a sensor dispenser.
Hemo DF
Hemo DF
A product for hand washing and disinfection
Ingredients and properties:
A combination of surfactants which, with a disinfecting component – alkil-dimethyl-benzil-ammonium- chloride act synergically and enable a triple purpose of the product:
- Efficient hand washing
- Successful disinfection
- Hand care, so that even when used frequently, the product not only does not dry out the skin, but makes it supple and elastic. It also helps wounds and other skin damage heal faster.
Area of use:
Anywhere frequent hand washing and disinfection are required, especially in healthcare, veterinary and food industry machinery. Given its exceptional efficiency, it has found its use in hospitality industry, public facilities and households as well.
Application method
For ordinary hand washing and disinfection, 2-3 ml of the product, rubbed in on wet hands for 3-4 minutes, would suffice. Repeat the process in case of extremely greasy skin.
For surgical disinfection, repeat the washing process 2-3 times using a sterile brush for nails and cuticles. It is also suggested to, after washing, rub a 1% solution of „Polisol R“ or „Alkoderm“ in the skin and leave it on for 5-10 minutes.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Polisol D ®
Product for shoe disinfection
Place of application:
Automated disinfection stations or separate devices for cleaning and disinfection of boots. Disinfection stations are placed at the entrance of a technologically important section of manufacture, or at the entrance of the manufacturing hall.
They represent a set of devices which disinfect footwear (boots), a hand disinfection part and a three-section ramp which enables passage only when both disinfection processes are done.
„Polisol D“ is used with stations with a submerging lattice and with models with rotating brushes as well.
Recommended working concentration is 1.5-2% of „Polisol D“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Alkoderm ®
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
Liquid form of this disinfectant enables application by spraying in automated disinfecting stations.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Dezipen
A neutral foaming combined agent for washing and disinfection.
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. Disinfection is based on bensalconium-chloride as a disinfecting component which, in combination with nonionic surfactants has very strong bactericidal and bacteriostatic effects.
Important:
Do not mix „Dezipen“with other washing agents.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Dezipen H
Mild alcaline foaming agent for washing and disinfection
An excellent foaming agent for daily washing and disinfection of filling machines in alcohol and soft beverage industry. In meat and dairy industry, in can be used for washing and disinfection of desks, floors and equipment.
It is used with a foam generator. Disinfection is based on active chlorine.
The product is used with cold water, in a 3-5% solution and exposition time of 10-15 minutes. After washing, thoroughly wash the surfaces with bacteriologically clean water.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Alkopen
Very alkaline foaming product for removing heavy dirt.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. After the contact time has passed, rinse the surfaces with water. With heavier tar and resin layers repeat the washing operation.
Area of application:
It can be used for washing all kinds of surfaces, except aluminium and zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Acidopen
Acidic foamy agent for washing and removing scale from floors, walls and equipment.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes.
Area of use:
Used for regular sanitation of all surfaces, except zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo LD
Hemo LD
Product for machine washing of pails in meat and dairy industry.
The product is based on NaOH (min. 35%) with an addition of organic sequestrens. It is used according to the instructions by the manufacturer of the washing machine.
Hemo 88 L
Product for washing very dirty surfaces – both by hand and using devices for pressurised washing.
Structure and purpose of the product:
„Hemo 88L“ is a liquid, very alkaline agent based on inorganic salts and surface active agents. Easily and completely soluble in water. The agent contains potassium hydroxide (NaOH) and thus is classified as a hazardous chemical. The structure and properties of „Hemo 88L“ are extremely well adapted to very strict requirements of slaughter industry, regarding efficiency in removing heavy dirt in atmos chambers (resin, tar) and floors (rubber wheels prints on the floor tiles, especially on the sections for forklift movement).
It is a very effective for machine washing of sticks for meat hanging on smoking trolleys.Besides steel and prochrome surfaces, „HEMO 88“ successfully cleans ceramic and concrete surfaces as well. It might cause blurriness if used on aluminum surfaces.
Preparation methods:
It is recommended to use a washing mashine (???) (80-90 °C and at least 50bar of pressure, with the concentration at the nozzle around 1%)
With hand washing, the working concentration is 3%, and the temperature of the solution at least 50°C. Use of protective equipment is obligatory: goggles, rubber gloves, apron and boots.
Means of containment:
„Hemo 88L“ is ought to be storaged in cold and dry places meant for keeping hazardous chemicals, according to the Safety list.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Neutral PPD
Neutral PPD
Product for floor washing and disinfection
A mild alkaline agent based on a combintion of anionic and nonionic tensides. The bactericidal component is active chlorine. It is used in a 3-5% solution. After washing, rinse the surfaces with fresh water and dry with floor mops.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo Uni
Hemo Uni
A universal product for washing and cleaning all kinds of solid surfaces.
„Hemo Uni“ is a powdery, medium-alkaline product based on inorganic salts and anionic surface active agents. It is easily soluble in water, creating cloudy-white, foamy solutions.
Place of application:
Working under the recommended circumstances, „Hemo Uni“ will efficiently degrease floors, desks and slaughter industry equipment parts, and is very efficient in dairies, large restaurants, hospitals and hotels as well.
Application methods:
„Hemo Uni“ is used for hand and machine washing.
With hand washing, the recommended work temperature lies between 45°C and 50°C and the recommended concentration is 2-3%.
With pressurised washing, a 75°C-80°C and a concentration of 1% should be used.
After washing, rinsing with warm water is recommended.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Hemo 88
Hemo 88
A product for washing atmos chambers, grills, aspirators, dishes, ovens and other heavily greased surfaces.
Hemo 88 is a powdery, very alcaline product based on inorganic salts and surface active agents. Easily and completely soluble in water (an exotermal reaction), creating cloudy, milky-white solutions.
The product contains potassium hydroxide (NaOH), which requires certain rules which must be followed during use. The product's structure and properties are extremely well adapted to very strict requirements of slaughter industry, regarding efficiency in removing heavy dirt in atmos chambers (resin, tar) and floors (rubber wheels prints on the floor tiles, especially on the sections for forklift movement).
It also shows extremely high efficiency in large kitchens, bakeries and other places where heavy dirt or burned organic remains may appear.
Besides steel and prochrome surfaces, „HEMO 88“ successfully cleans ceramic and concrete surfaces as well. When washing aluminum trays, the surface might lose its shine.
Application methods:
For washing atmos chambers, the work concentration is 3%, and the solution temperature – at least 50°C. When washing grills, aspirators, burned remains on dishes, ovens etc., a 5% solution heated to 60-70°C should be used. When it comes to this kind of washing, time of effect is of great importance. Whenever possible, disassemble the grill parts and submerge them into the hot solution. Leave it for several hours (during the night, for example) and then remove the dirt separately. Aspirators and ovens should be sprayed with a 5% solution and left over the night. With hand washing, protective equipment must be used: goggles, rubber gloves, apron and boots.
Storage methods
„Hemo 88“ is ought to be storaged in cold and dry places meant for keeping hazardous chemicals, according to the Safety list.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem SK
A product for removing scales and corrosion from ceramic and chromed surfaces.
Contents and purpose of the product:
„Lactochem SK“ is a liquid, acidic product, based on mineral acids and surfactants.
Application method:
It is used for hand cleaning of ceramic and chromed surfaces and removal of scales and corrosion traces. The product is applied with a sponge or brushes, left for 10 minutes and then rinsed with fresh water. If needed, repeat the process. Use protective work equipment for acids (rubber gloves).
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Dezobarijere
Dimenzije: 600mm x 400mm
Kliknite na fotografiju da bi ste je uvećali.
Dezobarijera A
Dezobarijera B
Soap dispensers
Sensor soap dispenser
Foam dispenser
Senzorske kante za smeće
Učinite maksimum za zaštitu od infekcije
Kliknite na fotografiju da bi ste je uvećali.
Točkovi sa crevom
Kliknite na fotografiju da bi ste je uvećali.
Penomati
Kliknite na fotografiju da bi ste je uvećali.
Dezostanice
Kliknite na fotografiju da bi ste je uvećali.
Hemopers
Sredstvo za dezinfekciju čvrstih površina i opreme
Sadrži persirćetnu kiselinu!
Sredstvo za dezinfekciju baktericidnog i fungicidnog dejstva. Baktericidna komponenta je aktivni kiseonik koji vrši ulogu dezinficijensa. Preporučuje se koncentracija od 0,05% – 0,5% i kontaktno vreme od 1 do 30 min
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Antipen S
Sredstvo za suzbijanje pene u uređajima za šurenje svinja.
Praškasto, srednje alkalno sredstvo sačinjeno od neorganskih soli i površinski aktivnih materijala.
Dodaje se u koncentraciji od 0.5% – 1% u vodu zagrejanu na temperaturu šurenja.
Olakšava postupak uklanjanja čekinja i omugućava nesmetan rad pumpi.
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!
Dairy industry programme
Polisol D®
Product for shoe disinfection
Place of application:
Automated disinfection stations or separate devices for cleaning and disinfection of boots. Disinfection stations are placed at the entrance of a technologically important section of manufacture, or at the entrance of the manufacturing hall.
They represent a set of devices which disinfect footwear (boots), a hand disinfection part and a three-section ramp which enables passage only when both disinfection processes are done.
„Polisol D“ is used with stations with a submerging lattice and with models with rotating brushes as well.
Recommended working concentration is 1.5-2% of „Polisol D“.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Alkoderm
A modern product based on alcohol and selected quaternaries for prolonged disinfection of hand skin.
Liquid form of this disinfectant enables application by spraying in automated disinfecting stations.
Hemosept
Hemosept
A product for general sanitation and disinfection of water.
Ingredients:
100g of the granulate contains 99g Sodium dichloroisocyanurate dihydrate
Physical and chemical characteristics:
White granules of a specific scent similar to that of chlorine, easily and completely dissolvable in water, with an extremely high bactericidal effect on bacteries, fungi, algae and certain types of viruses.
Application:
1. General sanitation in public institutions, food industry, healthcare, veterinary, individual households, farms etc.
a) Working concentration:
For regular sanitation or disinfection of surfaces, a water solution of „Hemosept“, prepared just before use, should be used. It is enough to dissolve 2g of „Hemosept“ per 10l of water, which can release active chlorine in concentration of around 100 mg/l. Thusly prepared solution is usable for the next 6-8 hours. In the situation of extremely exacerbated hygienic conditionse (epidemic, natural disasters), for disinfection of earthen floors in animal facilities, disinfection of faeces and preparation of disinfecting barriers, the concentration should be doubled (4g/10l).
b) Working time
Depending on the contamination degree of the surface, the needed effect time varies from 3 minutes to 2 hours.
In the case of extreme contamination – repeat the disinfection procedure.
2. Disinfection of water in pools
It is performed with consultations with experts from our company.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Dezipen
A neutral foaming combined agent for washing and disinfection.
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. Disinfection is based on bensalconium-chloride as a disinfecting component which, in combination with nonionic surfactants has very strong bactericidal and bacteriostatic effects.
Important:
Do not mix „Dezipen“with other washing agents.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Dezipen H
Mild alcaline foaming agent for washing and disinfection
An excellent foaming agent for daily washing and disinfection of filling machines in alcohol and soft beverage industry. In meat and dairy industry, in can be used for washing and disinfection of desks, floors and equipment.
It is used with a foam generator. Disinfection is based on active chlorine.
The product is used with cold water, in a 3-5% solution and exposition time of 10-15 minutes. After washing, thoroughly wash the surfaces with bacteriologically clean water.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Alkopen
Very alkaline foaming product for removing heavy dirt.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes. After the contact time has passed, rinse the surfaces with water. With heavier tar and resin layers repeat the washing operation.
Area of application:
It can be used for washing all kinds of surfaces, except aluminium and zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Acidopen
Acidic foamy agent for washing and removing scale from floors, walls and equipment.
Means of application:
It is used with a foam generator, in a 3-5% solution. With foam generators working only with pressurized water, use warm water (50°C - 60°C) if possible. Foam generators working on compressed air work with cold water. Contact time is between 15 and 20 minutes.
Area of use:
Used for regular sanitation of all surfaces, except zinc.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem BM
tečno sredstvo za pranje diskontinualnih i kontinualnih bućkalica za maslac
Sastav i namena sredstva:
"Lactochem BM" je tečno neutralno sredstvo na bazi površinski aktivnih materija i organskih seljuestrena.
Način primene i delovanje:
Sredstvo razvija izuzetno jaku penu koja dostiže do svih delova bućkalice, odvaja i emulguje masnoće pri čemu se visina pene smanjuje.
Naglo smanjivanje pene ukazuje na visok sadržaj masnih ostataka, pa se postupak pranja može ponoviti.
Okvirna koncentracija je od 1 - do 3 % "Lactochem- a BM", a vreme delovanja zavisi od količine zaostalih masnoća i kreće se od 10 do 30 minuta.
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!
Lactochem G
Sredstvo za pranje gajbi za mleko i kiselomlečne napitke
Sastav i namena sredstva:
"Lactochem G" je praškasto, alkalno sredstvo na bazi neorganskih soli i površinski aktivnih materija.
Način primene i delovanje:
Sredstvo razvija kontrolisanu penu što omogućuje njegovu primenu u mašinama za pranje gajbi špricanjem.
Preporučuje se radna koncentracija od 1-2 % i temp. od 60 - 70 °C
Vreme delovanja zavisi od radnog takta peračice za gajbice.
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!
Hemo Uni
Hemo Uni
A universal product for washing and cleaning all kinds of solid surfaces.
„Hemo Uni“ is a powdery, medium-alkaline product based on inorganic salts and anionic surface active agents. It is easily soluble in water, creating cloudy-white, foamy solutions.
Place of application:
Working under the recommended circumstances, „Hemo Uni“ will efficiently degrease floors, desks and slaughter industry equipment parts, and is very efficient in dairies, large restaurants, hospitals and hotels as well.
Application methods:
„Hemo Uni“ is used for hand and machine washing.
With hand washing, the recommended work temperature lies between 45°C and 50°C and the recommended concentration is 2-3%.
With pressurised washing, a 75°C-80°C and a concentration of 1% should be used.
After washing, rinsing with warm water is recommended.
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem SK
A product for removing scales and corrosion from ceramic and chromed surfaces.
Contents and purpose of the product:
„Lactochem SK“ is a liquid, acidic product, based on mineral acids and surfactants.
Application method:
It is used for hand cleaning of ceramic and chromed surfaces and removal of scales and corrosion traces. The product is applied with a sponge or brushes, left for 10 minutes and then rinsed with fresh water. If needed, repeat the process. Use protective work equipment for acids (rubber gloves).
Note:
The suggested work method is given as an average one and according to our best knowledge. With certain users, deviations from the specified values may appear, which is a consequence of different circumstances and means of work.
Lactochem KD
"Lactochem KD" je tečno, kiselo sredstvo na bazi inhibirane azotne kiseline sa dodacima za bolje kvašenje tretiranih površina i suzbijanje pene.
Koristi se za periodično čišćenje cevovoda, pumpi i druge procesne opreme od mlečnog kamenca.
Posebno je uspešno na farmama za čišćenje muznih uređaja.
"Lactochem KD" se koristi u CIP sistemima
Koristi se vodeni rastvor (1-1.5 %) na temp. od 60-65 °C i uz delovanje od 15-20 minuta.
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!
Lactochem CT
Tečno sredstvo za pranje cevovoda i uređaja CIP sistemom
Sastav i namena sredstva:
"Lactochem CT" je tečno alkalno sredstvo na bazi natrijum hidroksida, površinski aktivnih materija i organskih sekvestrena.
Koristi se za sva alkalna pranja CIP sistemom u mlekarama i na farmama.
Visoki alkalitet rastvora uz delovanje površinski aktivnih supstanci, efikasno odstranjuje ostatke mleka i mlečnih prerađevina sa tretiranih površina. Posebni dodaci omogućuju emulgovanje odvojenih masnoća, kao i lako ispiranje sistema posle pranja.
Sadržaj natrijum hidroksida je od 33 do 35 %.
Način primene i delovanje:
"Lactochem CT" se koristi na temperaturi od 70 - 80 °C i koncentraciji od 2 do 3 % sredstva, odnosno 0.70 do 1.05 % računato na čist NaOH.
Vreme pranja zavisi od stepena zaprljanosti i kreće se oko 30 minuta.
Nakon pranja "Lactochemom CT" potrebno je ceo sistem temeljno isprati čistom vodom.
Napomena:
Predložen način rada je dat kao prosečan i odgovara našim najboljim saznanjima. Kod pojedinih korisnika se mogu javiti odstupanja od navedenih vrednosti što je posledica specifičnih uslova i načina rada!